430 Stainless Steel coil

430 stainless steel coil is a high quality alloy that is known for its corrosion resistance and high strength properties.

They have better thermal conductivity than austenite grades stainless steel coils, a smaller thermal expansion coefficient than austenite strip, heat fatigue resistance.430 stainless steel coil is available in a wide range of sizes and thicknesses from stock. It has good formability and weldability characteristics with minimal distortion or warpage during welding processes.

Specification


International StandardASTM, AISI, JIS, ISO, EN, DIN, BS
Hardness≤200HV
Thickness0.02mm-6.0mm
Width1.0mm-1500mm
EdgeSlit/Mill
Paper Core Internal DiameterØ500mm paper core, special internal diameter core and without paper core on customer request
Surface FinishNO.1/2B/2D/BA/HL/Brushed/6K/8K Mirror,etc
Technical TreatmentCold Rolled, Hot Rolled
Mill Test Certificate(MTC)EN10204 3.1
Test ContentFlange & Flaring Test,Reverse Flattening Test, Roughness Test, Hydrostatic/Pneumatic Test, Eddy Current Test (NDT), Surface Finish Verification, Dimensional Inspection, Material Certification
Certificate

TUV ISO 9001:2015 , PED 2014/68/EU , AD 2000-WO 

DIN EN ISO 9606-1 , DIN EN ISO 14732 Welder Certificate

EN ISO 9712 NDT Personnel Certificate EN ISO 15613 WPQR


Chemical Composition %


GRADECSiMnPSCrNi
430≤0.12≤0.75≤1.00≤0.040≤0.03016.00-18.00≤0.75


Mechanical Propertoes


  Grade EN GradeYield Strength Rp0.2(N/mm²)Tensile Strength Rm(N/mm²)Hardness(HR B)Vickers Hardness(HV)Elongation A50%
4301.4016≥206≥450Annealed≤200≥22


Message
NamerequiredNameerror
MobilerequiredMobileerror
EmailrequiredEmailerror
Messagerequired
You may also like

Copyright © All Rights Reserved: Jiangsu YouBeiTe Metal Products Co., Ltd

Message
NamerequiredNameerror
MobilerequiredMobileerror
EmailrequiredEmailerror
Messagerequired