202 Stainless Steel coil

202 stainless steel coil is similar to 201 stainless steel coil but with lower carbon and higher nickel content, which reduces its strength and ductility.

The 202 stainless steel coils are the hot rolled or cold rolled coils of thickness 0.02mm – 6.0mm thick that can be supplied in width up to 2000mm, after being cut from the original cast piece (depending on the dimensions). The coils are supplied in either straight lengths or curved lengths depending on the specification requirements of each project. The coils can be supplied with edge protection if required.

Specification


International StandardASTM, AISI, JIS, ISO, EN, DIN, BS
Hardness≤220
Thickness0.02mm-6.0mm
Width1.0mm-1500mm
EdgeSlit/Mill
Paper Core Internal DiameterØ500mm paper core, special internal diameter core and without paper core on customer request
Surface FinishNO.1/2B/2D/BA/HL/Brushed/6K/8K Mirror,etc
Technical TreatmentCold Rolled, Hot Rolled
Mill Test Certificate(MTC)EN10204 3.1
Test ContentFlange & Flaring Test,Reverse Flattening Test, Roughness Test, Hydrostatic/Pneumatic Test, Eddy Current Test (NDT), Surface Finish Verification, Dimensional Inspection, Material Certification
Certificate

TUV ISO 9001:2015 , PED 2014/68/EU , AD 2000-WO 

DIN EN ISO 9606-1 , DIN EN ISO 14732 Welder Certificate

EN ISO 9712 NDT Personnel Certificate EN ISO 15613 WPQR


Chemical Composition %


GRADEStandardCSiMnPSCrNi
202

 ASTM A240

0.151.007.50-10.00.0600.03017.00-19.004.00-6.00


Mechanical Propertoes


  Grade EN GradeYield Strength Rp0.2(N/mm²)Tensile Strength Rm(N/mm²)Hardness(HR B)Vickers Hardness(HV)Elongation A50%
2021.4373≥275≥520Annealed≥150≥40


Message
NamerequiredNameerror
MobilerequiredMobileerror
EmailrequiredEmailerror
Messagerequired
You may also like

Copyright © All Rights Reserved: Jiangsu YouBeiTe Metal Products Co., Ltd

Message
NamerequiredNameerror
MobilerequiredMobileerror
EmailrequiredEmailerror
Messagerequired